Soft soil reinforcement Drilling Rig Mud Pump
Drilling Rig Mud Pump Brief Introduction
BW160/BW200/BW250 mud pump are mainly used for irrigation agricultural machinery.the main characteristic is the high pressure,lift much,less engergy consumption,easy operation,high quality and duarable,easy to move,especially for mountain terraces of irrigation.
They are also the main equipment of the geological survey,the main role in the process of core drilling boreholes is to supply fluid(mud or water),making it circulate during drilling and carry rock waste back to the ground,in order to achieve and maintain the bottom hole clean and lubricate drill bits and drilling tools with cooling.
Drilling Rig Mud Pump Application Range:
- 1.Projects: Construction drilling of the projects e.g. prospection, geotechnical investigation(geological exploring), railway, road, port, bridge, water conservancy and hydropower, tunnel, well, industrial and civil construction;
- 2. Exploration: Coal mining exploration, Ore exploration;
- 3. Water well : Small hole diameter water well drilling;
- 4. Pipe-installing : Geothermal pipe-installing for heat pump;
- 5. Foundation piling: Small-diameter hole foundation piling drilling.
Drilling Rig Mud Pump Characteristics
They are also the main equipment of the geological survey,the main role in the process of core drilling boreholes is to supply fluid(mud or water),making it circulate during drilling and carry rock waste back to the ground,in order to achieve and maintain the bottom hole clean and lubricate drill bits and drilling tools with cooling.
BW-250 Mud Pumps is equipped with drilling rigs to drill holes with mud. During drilling mud pump pumps slurry to the hole to provide coat to the wall, to lubricate the drilling tools and to carry the rock debris up to the ground. It is applied to geological core drilling and prospecting drilling with depth less than 1500 meter.
All our mud pump can bedriven by electric motor,diesel engine,hydraulic motor.
Specification
Precautions for Drilling Rig Mud Pump
- (1) Always pay attention to the indication of pressure gauge. If the indication of pressure gauge or the safety device does not work after exceeding the pressure, find out the reason and clear the fault
- Restart.
- (2) Pay attention to whether the structure of the mortar pump and motor is normal. When any fault is found, stop the pump immediately and open the discharge valve to reduce the pressure and eliminate the fault.
- (3) Attention should be paid to make the gland press the packing to avoid leakage. If there is still leakage after pressing, the packing or piston should be replaced according to the specific situation.
- (4) The consistency of the mixed mortar shall be measured before entering the pump. During the test, the consistency meter shall be vertical to the slurry surface, and it shall be laid down easily to sink with its own weight.
- (5) At the end of each shift, clean water must be pumped immediately, and the pipeline and pump interior must be cleaned until the ball valve, discharge port, suction port and discharge port are ensured
- The valve is clean and smooth.
- (6) The upper chamber should be filled with oil.
BW200 High Quality Reciprocation Piston Drilling Mud Pump
Product Tags:
|
|
Soft soil reinforcement Drilling Rig Mud Pump Images
|
